Three phase Input +
Three
phase Output
ONLINE UPS is one type of Uninterruptable Power Supply
that provides continuous power supply to critical
equipment & system by constantly converting incoming AC
power to DC power and then back to AC power. It Provides
protection against any type of power failures i.e. Power
Surge, Voltage reregulation, Brownout, complete Blackout
and it’s help to give consistent power supply to the system.
- Process Industries
- Manufacturing Industries
- Research Laboratories
- Data Centers & Server Rooms
- Medical & Healthcare Units
- Telecommunication Network
- Financial & Educational Institute
Technical Specification
| Make | COSMIC+® | ||
| Model No. | MS+303U | ||
| Input Phase | 3 phase + N + E | ||
| Rating in KVA | 10 KVA to 200 KVA | ||
| Rated Input voltage | 415 V ± 10%, AC Single Phase | ||
| Input Frequency | 50/60 Hz | ||
| Output Phase | 3 phase + N + E | ||
| Rated output voltage | 380 / 400 / 415V ± 1%, AC Three Phase | ||
| Output voltage regulation from no-load to full load | ± 1% | ||
| Frequency stability | 50Hz ± 0.1Hz | ||
| Transient response time | Around 40msec | ||
| Inverter efficiency | > 93 % | ||
| Overload time (without bypass) in Sec. for | 110% for 5 mins & 150% for 60 Sec | ||
| Output wave form | PWM Sine wave | ||
| Total Harmonic distortion for | Less than 3% | ||
| Crest factor | 3:1 | ||
| Phase displacement | 120º ± 1º | ||
| Output Power factor | 0.8 | ||
| Technology | DSP based, IGBT Switching Double conversion | ||
| Transformer insulation | Inbuilt Copper/Aluminium Isolation transformer | ||
| Type of metering | LCD / Digital type / LED | ||
| Cooling method | Fan cooling | ||
| Cable entry (Incoming & Outgoing) | Bottom Rear side | ||
| Colour shade | Powder Coating – Black / Gray Met finish | ||
| Degree of protection for panel Enclosure | IP 20 | ||
| Audible noise at 1 mtr. Distance | Less than 50 dB | ||
| DC Bus voltage | 360 VDC / 384 VDC | ||
| Type of battery | SMF | ||
| Voltage rating & No. of batteries | 12 V & 30 Nos. / 32 nos. | ||
| Recharge time up to 100% capacity | 12 hours | ||
| Make of the Batteries | Exide / Amaron or equivalent | ||
| Type of Communication | SNMP communication port (on request) | ||
| Type of Bypass | Manual bypass switch / Static bypass on request | ||
| Digital Display | |||
| R, Y, B Input and Output Voltages, Output currents & Frequency, DC Voltage, Battery and Load Percentage and All Faults | |||
| Protection | |||
| Output Overload & Short circuit, Output Under & Overvoltage, DC Under & Overvoltage, Mains Under & Overvoltage, Mains Single Phasing. | |||
| Site Conditions | |||
| Maximum ambient temperature | 40° C | ||
| Minimum ambient temperature | 5° C | ||
| Design temperature | 40° C | ||
| Humidity | 95% RH | ||
| Altitude | Less than 1000m above mean sea level | ||
| Type of Earthing | Solid Chemical earthing required | ||